Summary
The PMO provides program and acquisition management for the systems and capabilities that modernize and sustain the National Airspace System (NAS) to advance NAS programs from concept to operation while providing technical support for air traffic control automation and decision support systems.
This job is open to
Clarification from the agency
Also open to those eligible for 30% or More Disabled.
Duties
This position is assigned to one of the following organizations within the PMO: Integrated Services and Analysis, AJM-1; Air Traffic Systems, AJM-2; Enterprise Services, AJM-3; and Surveillance Services Directorate, AJM-4. The four (4) PMO directorates' key functional areas are: (1) integrated resource management, engineering planning, analysis and integration, and program health management and acquisition support; (2) services that support decision making for traffic flow managers and services that go directly to pilots to improve safety and efficiency; (3) implementation and execution of the systems and I services that tie ground systems and aircraft together through communications, navigation, weather and aeronautical information and flight services in the NAS; and (4) support aircraft separation services provided by controllers to pilots with accurate and capable surveillance and automation. The General Engineer performs a mixture of routine and multiple and varying engineering assignments under the limited direction of a manager, project/ program manager, team leader, or more experienced engineer. Acts as an individual contributor and/or member of a team. May perform some leadership functions for small projects/programs/teams. Assignments may include: design work; field inspections; reviewing contractor work; collecting and analyzing data; performs trend analyses; engineering testing; writing technical/management reports; and recommending improvements to the design or operation of systems, equipment, or processes. Applies experience and detailed knowledge of engineering principles, theories and concepts to assist more experienced engineers in the design, development, and conduct of complex independent and inter-dependent engineering studies (i.e... feasibility, life-cycle costing, efficiency, risk analysis, cost benefit, and other engineering economics studies). Possesses knowledge of electronic, electrical, civil, hardware, software, mechanical, or systems to plan and accomplish assignments. Performs analyses of system designs, and assists more
experienced engineer in identifying and measuring resiliency vulnerabilities and impacts. Applies Acquisition Management System (AMS) policies and processes to contribute or participate in all phases of procurement activities, which includes, analyzing specifications, reviewing bids, evaluating proposals, monitoring contractor performance, and coordinating with contractor to resolve issues. The employee may perform limited functions in serving as Contracting Officer Representative (COR). Performs trend analyses to recommend improvements and aid in management decision-making. Uses design software, instruments or tools to analyze project designs and to recommend improvements to the design or operation of equipment and systems. Utilizes automated tools such as macros, pivot tables, advanced filtering, etc. to create graphics and charts for inclusion in presentations to senior officials. Participates as a team member in planning, monitoring, and conducting special projects, studies, and initiatives. Conducts engineering testing analyses to assess the impacts of operational changes on infrastructure, equipment, and systems. Analyzes problems, identifies significant factors, gathers and interprets pertinent data, and applies established rules and procedures to recommend improvements to the design or operation of systems, equipment, or processes and to provide support in the development and implementation of solutions. recommend effective solutions. Researches and collects information/data to identify engineering issues, which could impact the project/program. Contacts are primarily internal to the PMO with some contact with contractors, customers, and external organizations. Contacts are typically intended to share information, provide data and/or written analyses, and/or discuss the statuses of assignments. Perform other duties as assigned.
Requirements
Conditions of Employment
- US Citizenship is required.
- Selective Service Registration is required for males born after 12/31/1959.
- Designated or Random Drug Testing required.
- This position has a positive education requirement. Transcript(s) required.
Qualifications
To qualify for this position at the H-band you must demonstrate in your application that you possess at least one year of specialized experience equivalent to FV-G, FG/GS-10/11. This experience is typically related to the line of work of the position to be filled and which has equipped the applicant with the particular knowledge, skills, and abilities to successfully perform the duties of the position. To be creditable, specialized experience must have been at least equivalent to the next lower level in the normal line of progression for the occupation in the organization. SPECIAIZED EXPERIENCE is defined as: Experience assisting in researching and collecting information to identify engineering issues which could have an impact on the program/project. AND Experience assisting with engineering studies and analyzing designs to support recommendations for improvements to the design or operation of equipment and systems. You should include relevant examples of the specialized experience in your work history. Errors or omissions may impact your rating or may result in you not being considered. Answer all questions to the best of your ability. DO NOT ASSUME THAT BECAUSE YOU HOLD, OR HAVE HELD THIS POSITION, YOU WILL AUTOMATICALLY BE FOUND ELIGIBLE. You may be asked to provide evidence or documentation that you have this type of experience later in the selection process. Your responses are subject to verification through job interviews, or any other information obtained during the application process. Any exaggeration of your experience or any attempt to conceal information can result in disqualification. *Applicants who fail to demonstrate possession of any of the above criteria AND who do not provide the required documentation will receive no further consideration for this position.* Applicants may be asked to verify information on your application for employment with the FAA. **All qualification requirements must be met by the closing date of this vacancy announcement.** Eligible applicants meeting the minimum qualification requirements and/or selective placement factor(s) (SPF) may be further evaluated on the Knowledge, Skills and Abilities (KSA) and/or Quality Ranking Factor (QRF) listed in the announcement. Based on this evaluation, applicants will be placed in one of the following categories: (1) score order; (2) category grouping; (3) alphabetical; or (4) priority grouping and referred to the selecting official for selection consideration.
Education
This position has a positive education requirement: Applicants must submit a copy of their college or university transcripts(s) and certificates by the closing date of announcement to verify qualifications. If selected, an official transcript will be required prior to appointment. You may upload these documents with your application in USAJOBS or fax it to fax number provided in the announcement (please include announcement number on each page).
Failure to do so will result in loss of consideration.
Schools must be accredited by an accrediting institution recognized by the U.S. Department of Education. Accreditation may be verified at the following website: www.ed.gov/accreditation.
Foreign education must be evaluated by a private professional organization specializing in interpretation of foreign education credentials or an accredited U.S. educational institution in terms of equivalence to a degree acquired at an American college or university. A copy of the evaluation results must be included, otherwise your foreign education will not be considered.
Basic Requirements: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor’s degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR; B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor’s degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) Note: An applicant who meets the basic requirements as specified in A or B above, except as noted under B.1., may qualify for positions in any branch of engineering unless selective factors indicate otherwise.
Preview Job Questionnaire
Make sure your resume includes detailed information to support your qualifications and answers to the job questionnaire.
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
IMPORTANT: Applicants may be rated on the extent and quality of experience, education, and training relevant to the duties of the position(s). All answers provided in the on-line process must be substantiated. Ensure that your application package/resume supports your responses.
Required Documents
Only supplemental documentation (e.g. transcript, certifications, SF-50, and/or veterans' documentation) will be accepted in combination with your on-line application or faxed to 202-267-7032. These documents must be uploaded on faxed or before the closing date of the announcement. All submitted documents must reference the announcement number. For guidance on how to create a Federal resume, visit http://www.archives.gov/careers/jobs/forms/resume-guide.pdf. Failure to submit all required documents by the closing date will result in a finding of ineligible. We are not responsible for incomplete, illegible or missing documents. Please DO NOT email your application documents. We cannot accept documents received via the email system. Documents sent via email will NOT receive consideration. This position has a positive education requirement; college transcripts are required for ALL candidates newly appointed to the FAA in the 0800 (Engineering) series. College transcripts must be submitted from current FAA employees applying for internal vacancies if they have never held a position in the 0800 (Engineering) series with the FAA. College transcripts are not required from current FAA employees who are currently occupying an 0800 (Engineering) series. If selected, official transcripts are required prior to employment. All Veterans: If you are claiming veterans' preference, you must submit either a DD Form 214 Certificate of Release or Discharge from Active Duty (Member 4 Copy or equivalent), or a document from the armed forces certifying that within 120 days you are expected to be discharged or released from active duty service under honorable conditions. If you are claiming 10 point preference, you must also submit a completed SF-15, Application for 10-Point Veteran's Preference, and supporting documents outlined on the SF-15. Documents must be uploaded or faxed to the Servicing Human Resource Management Office listed in this announcement and all documents must be received by the closing date of the announcement. If you fail to submit documentation, you will be assessed as a non-veteran. If you are claiming 10 point preference but fail to submit the supporting documents outlined on the SF-15, you will be tentatively assessed as a 5 point preference eligible provided your DD Form 214 reflects that you have the service required to qualify for preference. Documents must be uploaded or faxed to the Servicing Human Resource Management Office listed in this announcement and all documents must be received by the closing date of the announcement. If you fail to submit documentation, you will be assessed as a non-veteran. Veterans currently on active duty claiming veterans' preference: You will be granted tentative preference if you submit a document from the armed forces certifying that within 120 days you are expected to be discharged or released from active duty service under honorable conditions and your application shows that you have the required service. Prior to being appointed, you must provide to the Servicing Human Resource Management Office a DD Form 214 documenting discharge/release and showing that the service was honorable or general. If you are on terminal leave, you must provide documentation certifying authorized terminal leave. If you want consideration for one or more of the Special Hiring Authorities, documentation that must be submitted at time of application can be found at Direct Hiring Authorities | Federal Aviation Administration (faa.gov).
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
You must apply online to receive consideration. Your application must be submitted by 11:59 PM Eastern Time on the Close Date for it to be accepted. If you are applying for positions associated with FAA registers, your application must be submitted at the time a referral list is created in order to receive consideration for positions associated with a register.
IN DESCRIBING YOUR WORK EXPERIENCE AND/OR EDUCATION, PLEASE BE CLEAR AND SPECIFIC REGARDING YOUR EXPERIENCE OR EDUCATION.
We strongly encourage applicants to utilize the USAJOBS resume builder in the creation of resumes.
Please ensure EACH work history includes ALL of the following information:
- Job Title (include series and grade if Federal Job)
- Duties (be specific in describing your duties)
- Employer's name and address
- Supervisor name and phone number
- Start and end dates including month and year (e.g. June 2007 to April 2008)
- Full-time or part-time status (include hours worked per week)
- Salary (optional)
Determining length of General or Specialized Experience is dependent on the above information and failure to provide ALL of this information may result in a finding of ineligible.You may upload completed documents to your USAJOBS Account. This will provide you the opportunity to utilize the uploaded information again when applying for future vacancies. Please see this guide, Document Upload Guide, for more information on uploading and re-using the documents in your applications.
Next steps
Once we receive your complete application, the Human Resources Office will conduct an evaluation of your qualifications. Eligible and qualified candidates will be referred to the hiring manager for consideration. You will be contacted directly if selected for an interview.
For instructions on how to check the status of your application, please go to: USAJOBS Help Guide.
Important - If you make any changes to your application, you must resubmit it. If you make changes to your application and do not resubmit it, your changes will not be considered part of your application package, and only your previously submitted application will be evaluated.
All qualified applicants will be considered regardless of political affiliation, race, color, religion, national origin, gender, sexual orientation, marital status, age, disability, or other non-merit factors. DOT provides reasonable accommodations to applicants with disabilities. If you need a reasonable accommodation for any part of the application and hiring process, please notify the agency contact listed in the Agency Contact Information section of this announcement or the hiring manager. An employee with a disability must notify the decision-maker of the accommodation request. Job applicants and employees are required to follow up oral requests in writing. Decisions on granting reasonable accommodation will be made on a case-by-case basis. Additional information on reasonable accommodations procedures or on EEO Programs is available on Office of Civil Rights (ACR) or by contacting the local FAA Civil Rights Office.
|